Five of the Most Common Problems that Lead to Air Conditioner Service

As summer nears, air conditioner service should be something that crosses your mind repeatedly as you consider your whole home comfort. Of course there are a host of things to look for when thinking about air conditioner service, but a few concerns are more typical than others as you prepare to ramp up your air conditioner use for the next few months.

No matter when you last had your air conditioner service completed, make certain to keep these five potential issues in mind when your air conditioner is on the fritz.

1.     Leaking refrigerant

There are a few things that can cause low refrigerant levels. It could be due to an undercharge during installation or the system could have developed a leak over time. Adding refrigerant to an already leaky air conditioner is similar to using a band aid on the Hoover Dam. It’s not going to cut it. Leaks should only be taken care of by trained technicians like the ones at Precision Mechanical in Rapid City so that you can be sure your system is operating at its best. Having that simple air conditioner service completed means that you’ll fix the leak and have the refrigerant charge match the particular specifications of the manufacturer, which provides you with unmatched performance and efficiency.

2.     Lack of maintenance

Allowing filters and coils to build up with dirt and grime will not only lower your system’s efficiency, but it may cause a host of other issues if unaddressed. Setting up routine maintenance on your air conditioner with Precision Mechanical means that you’ll have a system providing you comfort when you need it most.

3.     Turning on and off

The air conditioner fan controls and compressor are most susceptible to wear, and if you have an air conditioner that cycles on and off often, you’ll likely have this issue. You’ll also want your service provider to check the wiring to make certain there isn’t any corrosion and that the wiring job itself is done correctly. Cycling on and off during cooling season may also be a sign that your system is not sized appropriately, and if that is the case you will also notice your home may have high humidity issues.  Because there are several issues to look at, you want to be sure you’re dealing with someone as reliable and experienced like the pros at Precision Mechanical.

4.     Sensor malfunctions

Air conditioners and their thermostat sensors are another common concern that can lead to air conditioner service or AC repair. Thermostat sensors, typically situated behind the control panel, measure the temperature of air coming into the coil. This helps your air conditioner know whether it needs to turn on or stay off. So if the sensor is disturbed you could be left with a system that cycles all the time.

5.     Drainage issues

Condensation is made by your air conditioner during the cooling process, and your system is created to take care of its own drainage. If the drain becomes clogged you could be subjected to mold or mildew issues, which can lead to an entirely different set of issues.

No matter the age of your air conditioner, there will always be problems that can rear their heads when it is used frequently. Summer is when your system should be running at its peak, so give the experts at Precision Mechanical in Rapid City a call at 605-206-3766.